Moto Backflip Help!!

[Finisher1214]

Downloaded a ROM App from the Marketplace after Rooting my phone.
Well I places the wrong ROM on the phone and used the App to flash it.
Phone went off I turned it on and stays at the Motorola Boot screen and goes no were.
I tried holding the power button and camera button and then I pressed what everyone told me to press and the screen stays and says you have pressed Volume Up.
I cant seem to do anything. Help please

[ATTDroids]

[Finisher1214]

If someone can give me an idea or something or help me I would really applicate it.

[Jellono]

If someone can give me an idea or something or help me I would really applicate it.

Ok it appears you have "Bricked" your phone..
Here is how to recover from it..

[Instructions] How to flash your phone

Not too hard if you have "Rooted" you should be able to get thru this easly..
It will return you to 1.5 and you will need to re root..

Dave.

PS.. 5 minutes is a really short period of time between your "Desperate" posts.. you really should excursive the search feature these problems have been talked about over and over again on this and other forums..

[Finisher1214]

I want to thank you for your help. I love you. BTW no homo

[Finisher1214]

Ok I followed it and everytime I start to flash it says Fail. I downloaded many different versions

[Jellono]

Ok I followed it and everytime I start to flash it says Fail. I downloaded many different versions

Well you should only flash the version for your backflip ie Us etc

As for your problem???? You need to be more exact

1. What backflip do you own?
2. What is the exact error
3. Which step failed you?

[Finisher1214]

1. Umm how do I find that out
2. Umm it just says fail
3. It went to 100% then 100% I think one more then it said fail

[Finisher1214]

Failed flashing process. said twice Phone[0000]: Error sending JUMP command Device API Error: 0xE0030040 Address: 0xB0000 cant see the rest to type

[Jellono]

Ok so Here are the steps verbatum.... One of these failed?

What you are going to need:

• Rsdlite 4.5.7 or higher (find on google)
• Motorola drivers for your system (windows only)
• Firmware suitable for your phone (same version or higher and also made for your phone)
  
  

How to flash:

• Install rsdlite
• start your phone in usb boot loader mode (hold d+j while pressing power)
• connect phone to pc with usb cable
• open rsdlite (open with administrator rights)
• check your phone is seen by rsdlite
• browse for the firmware (This part is important!!)
  you should put this in the root of your c: drive and call it flash.sbf or something simple without special characters or spaces
  still has to end with .sbf
  It won't work otherwise!!
• hit start
• wait till it has finished
• It might reboot back to a recovery screen or blue screen, just take out your battery for 30 seconds, then replace and press the power button

Did you buy Your phone in the united states?
China?
Canada?


Here is the list of roms..


Branding: AT&T US
Version: 0.12.1199
Secure Version: 0006
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: AT&T US
Version: 0.13.35
Secure Version: 0009
Bootloader Version: 05.13
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: AT&T US
Version: 0.13.37
Secure Version: 0010
Bootloader Version: 05.13
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


MOTUS - ME600 / BACKFLIP - EMARA MB300

Branding: Generic Chinese
Version: 00.00.34
Secure Version: 0005
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Generic Chinese
Version: 00.10.8
Secure Version: 0006
Bootloader Version: 05.17
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Retail Italian
Version: 0.1.2
Secure Version: 0005
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Retail Italian
Version: 0.3.6
Secure Version: 0006
Bootloader Version: 05.17
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Optus Australia
Version: 0.2.3
Secure Version: 0006
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Optus Australia
Version: 0.2.9
Secure Version: 0006
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Retail German
Version: 0.2.9
Secure Version: 0006
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Retail German
Version: 0.2.12
Secure Version: 0006
Bootloader Version: 05.12
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Retail French
Version: 0.3.6
Secure Version: 0006
Bootloader Version: 05.13
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


Branding: Retail British
Version: 0.3.7
Secure Version: 0006
Bootloader Version: 05.13
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.


BACKFLIP - LATAM MB300

Branding: Personal Argentina
Version: 0.12.712
Secure Version: 0005
Bootloader Version: 05.01
Requires RSD Lite 4.5.7.
Requires Moto Android (De)packer 1.2 to edit.

I am suspecting you may live in one of these countries or purchased the phone in one of them??

[TechN9ne1730]

Finisher1214, there is an edit button, Also give people more time then 5 minuets to reply. As for the problem, it may help if you could tell us what app and rom your referring to..there shouldn't be any ROMs in the market..